Asphalt Paving in Hamshire, TX

Asphalt paving in Hamshire is rural, low-ground work. Hamshire is a small community in western Jefferson County, about 20 miles southwest of Beaumont, at about 13 feet of elevation. It first appeared as a census-designated place in 2020, with 962 residents.

History

Hamshire was probably named for Lovan Hamshire, who developed land in the 1870s. The Gulf and Interstate Railway served the town, a post office opened in 1897, and a townsite was platted in 1911. Natural gas from the Hamshire field was a big part of the economy through the 1980s.

Low and flat

At 13 feet, Hamshire is low and flat, and the soil drains slowly. Driveways need a firm base and a surface shaped to move water off.

SH 124

State Highway 124 runs through the community. New or changed driveway access onto a state highway needs a TxDOT permit; county roads go through Jefferson County.

Typical work

• Gravel conversions
• Long rural drives
• Pads and turnarounds

Gas-field properties

The Hamshire gas field shaped the local economy for decades, and some properties have old pads, roads or fill from that era. We probe for soft or uneven ground and undercut where needed.

Low, flat ground

At about 13 feet, Hamshire is flat and slow to drain. Long drives should be slightly raised with ditches on the sides. We shape them to shed water quickly.

Gravel conversions

Many Hamshire drives are gravel. Converting them to asphalt cuts dust and ruts, and sound gravel can be reused as base.

County and state roads

Where a driveway meets SH 124, TxDOT controls access; on county roads, Jefferson County does. We confirm which applies.

Common Hamshire projects

• Gravel-to-asphalt conversions on long drives
• Pads and turnarounds for trucks and equipment
• Church and school lot repairs and striping

Timing

After heavy rain, low fields and shoulders stay soft. We schedule Hamshire paving after a dry stretch so trucks can reach the work without rutting the property.

Costs

National guides list new asphalt driveways at about $5 to $12 or more per square foot. Long drives and pads vary with length and base work. Reusing gravel lowers cost.

Planning

We visit, measure, check drainage and the culvert, and confirm whether TxDOT or Jefferson County controls the road at your driveway. Then you get an itemized quote.

Paving in stages

On long drives, paving the busiest section first is an option.

Maintenance

Seal every few years and keep ditches clear so water leaves the drive.

Scheduling

Hamshire is about 20 miles southwest of Beaumont. We group work in west Jefferson County. Most jobs take two to four days.

Schools and churches

Hamshire-Fannett ISD serves the area, and churches and community buildings have lots that need patching, sealing and striping. We schedule around events.

Pads

We build pads for trucks, trailers and equipment with a heavier base.